PDA

View Full Version : Check out my custom work on my 150 Gal stand I got done tonight! wrapped in vinyl....



triggawhat719
01-14-2015, 04:19 AM
I added a couple of pictures of my stand. I painted it a flat sand color and added the copper vinyl decals all over the tank stand. What do you guys think? I can probably create any design in the world. I am trying to make the stand really stand out.

Just_Tim
01-14-2015, 08:02 AM
I like the decal work. Looks really good man.




I am America and So can You

RuRoo
01-14-2015, 11:01 AM
Nice work

Joe
01-14-2015, 11:39 AM
Cool

Levi
01-14-2015, 12:11 PM
make sure you "mod" the stand so that you can get the 40g breeder sump in and out without having to lift the tank off the top of the stand. I did this when I had a 150g tall and basically had a leak in the sump and had to drain the entire 150g tank and take out all the rock and coral to get down to the sump to be able to take the sump out and replace it. Dont make the same mistake!

Just_Tim
01-14-2015, 01:47 PM
make sure you "mod" the stand so that you can get the 40g breeder sump in and out without having to lift the tank off the top of the stand. I did this when I had a 150g tall and basically had a leak in the sump and had to drain the entire 150g tank and take out all the rock and coral to get down to the sump to be able to take the sump out and replace it. Dont make the same mistake!

Good point. I also had this same tank and stand and I do believe that the one of the sides can be disisembled fairly easy.




I am America and So can You

charleshardy5
01-14-2015, 01:57 PM
Interesting, always been a fan of the Egyptian look, never seen it in a tank though. Keep the updates rolling

Prepare Yourself! http://tinyurl.com/nsxj9k3

Campbell
01-15-2015, 03:50 PM
Nice man


Sent from my iPhone using Tapatalk

triggawhat719
01-16-2015, 01:10 PM
I have been working on that. the stand is extra braced, and I am working on making my door magnetic so they come on and of with a click :)
right now i am still trying to get my holes drilled for the tank i need a 1.75" saw for my 1" bulk heads and a 1.375" for my 3/4" bulk head

triggawhat719
01-16-2015, 02:07 PM
I have been working on that. the stand is extra braced, and I am working on making my door magnetic so they come on and of with a click :)
right now i am still trying to get my holes drilled for the tank i need a 1.75" saw for my 1" bulk heads and a 1.375" for my 3/4" bulk head